Bits and pieces

Sewing fairy wings on my sewing machineI’ve been sewing Pixie Kitten bodies, and have a few of them in progress. I received most of what I spent on my ill-fated Viking Platinum from the Post Office, after the shipping disaster that cracked it to bits, and instead of buying a new sewing machine, I’ve been adding parts to my Kenmore 19233, to make it more versatile. I showed you the walking feet I’ve been using to sew, but I also found a straight stitch needle plate that fit.

Straight stitch, single hole throat plate for Kenmore 19233It’s a Janome part number 200093305, which I bought online from Sewing Machines Plus. Janome made the Kenmore, and so I did some research until I found one that matched mine. This one fits the Kenmore 385 series. It’s easy enough to put on and take off. The larger screw in the upper left corner is what holds it in place. It’s good to remove the needle plate to clean out lint anyway. So, when you change plates, you can get in there to clean too.

Organizing my presser feet and sewing machine partsWith two machines, I’m accumulating a lot of presser feet and miscellaneous parts, and so I got a plastic organizer at Michaels to keep them in order. Some of the feet are left over from the Platinum, but these seem to work on my Viking Sarah, with the exception of the buttonhole sensor foot, which I will have to sell sometime.

Organizing my sewing machine bobbinsI divided up my bobbins by machine too, each group in their own case. I had been finding them here and there, tangled together. I finally got my other shelf up in my workroom, and a couple more boxes to house fabrics. Sometimes I feel like I live in a storage facility, but it is better to have everything somewhat organized. I’m amazed how nice having just one open patch on a table can feel.

Adopt a pet from your local animal shelter or rescue groupI’m still trying to expand my very limited knowledge of photography as well, while hoping to upgrade to a DSLR at some point. I’ve been practicing using my camera when I can. This is Spunky.¬†He and other adorable kitties are at¬†adoption events this weekend. The kitties have been patient with me while I’ve tried to figure out how to photograph them. My camera doesn’t handle the low light or motion very well. Since I now don’t necessarily need to put my postal insurance funds toward a sewing machine, I hope to be able to put it toward a camera instead. This just feels like something I’d like to be able to do better. I’m not sure where that will lead right now, but learning something new, especially something that can be used creatively, is appealing to me.

,,

Comments

  • Elizabeth,

    You have just saved my sanity. I just spent two hours on the phone with lovely Sears Parts Direct in an attempt to purchase a straight-stitch plate. The end result? Their manager saying that there must not be any other plate besides the zig-zag. -_- Thank you so much for pointing me in the right direction!!!

    Yvonne

  • Glad that was helpful, Yvonne! I had a very hard time finding one too, and also asked a Janome dealer first. I found it by following a trail on the Internet. It turned out the same Kenmore had been manufactured as a Janome model, and someone else had written a blog post about that. Once I knew the Janome model number, it was easier to search. Of course, once I found the stitch plate, it had the Kenmore 385 series listed, but I would have never thought to look for that number. I’d been searching for the Kenmore 19233 model number. Anyway…glad you and I both found it!

Leave a comment

Your email address will not be published.


*